ASP-FastBoard - Demo/Support-Forum
Forum anmelden / register Board
SearchSearch CalendarCalendar GalleryGalleryAuction-PortalAuctions GlobalGlobal Top-ListTopMembersMembers StatisticsStats
get your RSS-Feed
Language/Sprache:  Admin  
 Login: ChatChat (0) new User-MapUser-Mapsend Passwordsend Password RegisterRegister

Forum Overview » Game-Server » Allgemeines » how to Double Sided Tape Liner Removal
Pages: (1) [1] »
Registration necessaryRegistration necessary
how to Double Sided Tape Liner Removal
myvaporno Access no Access first Post cannot be deleted -> delete the whole Topic 
Group: User
Level: leichter Spammer


Posts: 108
Joined: 6/10/2022
IP-Address: saved
offline


To remove the liners from the Double Sided Acrylic Foam Tape we recommend the use of either a knife, scissors, or a fine brush.



Cleaners & Primers for Double Sided Foam Bonding Tape:
To achieve the perfect bond, surface preparation is a must. The Primers 33 and 101 will help you to reach this by offering excellent cleaning and priming characteristics.

Silver Clean: The Silver Clean is an isopropanol /alcohol mixture (IPA). This cleaner has excellent degreasing capabilities and is, due to its volatile nature, extremely suitable for time-critical applications which many of our and our customers’, applications are. Silver Clean is suitable for light to medium-contaminated materials. Grease, dust, oils, etc. are easily removed by this cleaner. In case of high contamination levels, Omni advises a more aggressive cleaner like MEK, Heptan, or Acetone. The principles of door production are basically the same; a panel (composite, wood, plastic, etc.,) is bonded to a steel or aluminum frame.



Silver Clean pre-drenched IPA cleaner towels: No more bottles of cleaner, no more spills, easy to use, less waste. Some of the advantages of the new Silver Clean pre-drenched towels. The mixture of 96% Isopropyl Alcohol and 4% Deionized Water ensures the level of cleaning needed for the use of the Silver Tapes. The standard packages contain 100 towels. The polyester cellulose nonwoven towels are 153mm x 216mm in size and are absolutely lint-free to prevent contamination of your bonding surface.



Applying for Double Sided Double Sided Acrylic Foam Tape to Glass: To complete the range of primers, we now offer the Omni Primer 101UV, which is the standard 101 primer with a UV tracer to check the use of primer in the production process. Besides this, we also offer the Primer 201, a silane primer, especially for the bonding of glass. Because of the hydrophilic characteristics of glass, the microscopic pores of the glass are filled with this primer to effectuate the best substrate for bonding.



Applying Foam Tape to Panels
Omni Primers are designed to work in conjunction with acrylic pressure-sensitive adhesive systems. When used correctly, adhesion promoters become a thin film on the surface of the material on which it is applied. The film anchors itself onto the material surface. The surface energy of this film is typically higher than the material to which the adhesion promoter is applied. The higher the surface energy level, the better the bond of the pressure-sensitive adhesive. The adhesion promoters are compatible with Omni’s ultra high bond acrylic foam tapes.

With the use of Foam Tape, these noises are minimized or eliminated altogether. Besides this, you can imagine that aesthetics are very important to these manufacturers as well. Applications in this industry are floor, wall, and ceiling panels as well as lighting and instrument panels.



Application Tools for Foam Tape:
A range of tape applicators, laminators, and pressers are avaliable for apply Foam Tape. An example is shown in the drawing/picture above. The hand laminator tool can also be fitted onto a fixture for in-line Foam Tape application and can be adjusted for the use of slit or spool rolls. Besides these applicators, any kind of custom-made equipment is available at our customers’ request.

Hand Laminator Application Tools
Hand lamination unit for lamination of Double Sided Acrylic Foam Tape directly to the substrate (glass or profile). Straight alignment with a specified (adjustable) distance from the edge of the substrate. Tape-width easy adjustable (5-30mm)
Wet-Out pressure by spring force.
Red-green indicator showing correct wet-out pressure.
Precision ball bearings.
Robust

Rack for storing the unit near the lamination workplace
Hand Pressers: Apply additional hand pressure on the application tool. (e.g. glass to frame or profile). Straight alignment.
Clamping width refers to the table
Wet-Out pressure by spring force.
A red-green indicator showing correct wet-out pressure.
Precision ball bearings.
Robust design.

Arrows RC jet
freewing rc jet

fms RC jet
flyfan rc jet
Sebart rc jet
DLE Engine
Hobbystar ESC
4k security camera
HSD RC jet
LX RC Jet



Continuous Laminator SGA 500: Linear lamination unit for stationary use. Lamination of Foam Tape directly to the substrate (glass or profile). Straight alignment with a specified (adjustable) distance from the edge of the substrate. Linear lamination unit for stationary use. Lamination of SGA tape directly to the substrate (glass or profile).
Tape-width easy adjustable (5-30mm)
Wet-Out pressure by spring force.
Precision ball bearings.
Unit to be integrated into your line.


8/8/2024 10:14:46 AM   
Registration necessaryRegistration necessary
Pages: (1) [1] »
all Times are GMT +1:00
Thread-Info
AccessModerators
Reading: all
Writing: User
Group: general
Bimon., Cyberlord
Forum Overview » Game-Server » Allgemeines » how to Double Sided Tape Liner Removal

.: Script-Time: 0.266 || SQL-Queries: 6 || Active-Users: 2,803 :.
Powered by ASP-FastBoard HE v0.8, hosted by cyberlord.at